Lowering kit / air ride kit is require to achieve a good look and less gap between tire and rear fender. Will not fit stock or OEM seat / modification will be required. Product Title Given For The Listing Describes Mostly Everything About The Brand And Models It Fits To (Please Also Check The Fitment Section If There Is Any In The Description). We Receive A Number Of Messages Daily And Work With Walk-in Customers. If You Need Clarification About Anything Or Have A Question That Is Not Addressed In The Listing, Please Feel Free To Send Us A Message Please Note: Due To The Impact Of COV On Businesses Worldwide, We Are Working With Limited Work Force So It May Take Some Time To Respond To Your Queries.
We Have Most Of The Products In Stock. Please Ignore The Available Quantity Mentioned In Our Listings. This Is Mentioned So The Item Does Not End And Watchers Do Not Lose Link To The Listings.Irregular Packages Like Fenders And Other Items May Come In Foam Only Packaging. Please Note, Settlement Of Claims Takes Time, We Will Require Your Patience Through The Process. In Most Cases Russia, Brazil, New Caledonia, Ukraine, Estonia, Lithuania, Latvia, Belarus, Azerbaijan, Kazakhstan, Mongolia, North Korea And More. Please Note: Tracking Numbers Are Provided On Request Within 10 Days Of Dispatch.
Settlement Of Claims Takes Time, We Will Require Your Patience Through The Process. Box Address But In That Case, We Will Not Be Responsible For Any Loss Or Damage To The Item. Changes Of Address After Ordering Will Additional Charge Of 40 Us Dollars.We Have Return Location At 18974 Pa, USA And Stuttgart, Germany. Still Attached With All Included Pieces Shown And Described In The Listing. The Products Should Be Described As Return Order, Not For Sale With Market Value "Zero" Sent Through No Other Than Postal Service. We Try Our Best To Keep Our Customers Happy But Problems Occur Unexpectedly Even After Our Strict Quality Control.
Please Note, We Can Only Help You If You Co-operate With Us In Resolving The Problems. These Matters Take Time But We Try Our Best To Resolve All Issues As Quickly As Possible. In Any Case, If The Goods Are Not As Expected Or Have Any Problem, Just Send Us A Quick Message With Pictures And We Will Try To Find A Solution As Quickly As Possible. No Manuals, Guides, Instructions, Photos Etc. Are Provided To Help You Install The Product.
Fit / Finish / Additional Work / Adjustments / Modifications Required. Most Of Our Fiberglass Products Are Made By Hand-lay Process 95% Of The Products Are Made This Way All Over The World Includes Light Weight Aircrafts/Big Ships/Boats/Canoes And Parts For Buses/Trucks/Train/Cars/Motorcycles Etc. Due To Being A Completely Manual Process, Chances Of Issues Are There. Note - There Are A Number Of Issues Which Are Present In Fiberglass Molded Products.Not Every Part Has All The Issues Or Same Issues With All Products We Generally Do Not Have Issues With Our Products. Some Products Don't Have Any Issues At All Which Is What We Aim For But In Some Cases, There Maybe A Few Or One Or All Of The Issues Mentioned Here. Please Do Not Expect Them To Look / Work As Mass Produced Items Right Out Of The Box. Fiberglass Products Will Be Supplied Unpainted (Unless Mentioned) And In Gel-coat / Primer Finish (White / Black / Grey / Any Other Color) Regardless Of Pictures Listed.
Actual Color / Finish Of The Item May Differ From Photos. Please Note: Gel-coat Is Purely A Sandable Surface And May Have Scratches (May Look Used But It Is Not). It Will Require Preparation/Prep-work, Paintjob, Sanding, Stretching/Compressing/Squeezing/Expanding Due To Warpage/Shrinkage And May Look Asymmetrical, Priming And Painting To Your Choice Of Color At Your Cost. Inner Surface Of The Parts May Look Bad / Unpleasing And May Require Preparation Work And Paintjob. You May Have To Do Any / Few / All Of The Following In Order To Make The Item Fit Your Application Perfectly Which Which May Require Professional Help And Can Attract Additional Charges To Be Paid (This Has To Be Paid By The Customer Only) Cutting / Grinding / Finishing / Trimming / Cutting Tail Light Slots / Filing / Increasing Hole Size / Bodywork - Includes Drilling Holes (We May / May Not Drill Holes Unless Indicated By Customer At The Time Of Ordering Regardless Of The Pictures) / Bondo / Body Filler Filling / Sanding / Scuffing / Scrubbing / Fiber Filling / More Material Adding Or Molding Etc.
/ Preparation/Prep-work / Polishing / Buffing / Gluing / Bonding / Fixing Broken Mounting Tabs / Relocation Of Broken/Bent Mounting Tabs/Brackets / Minor-major Modifications / Cleaning / Washing / Degreasing / Deburring / Other Forms Of Repairs / Adjustments / Lining Up, Customizing OEM/ Original Or New Seats To Match With The Airbox Covers For VROD And Softail Models, Additional Hardware - Nuts / Bolts / Washers / Spacers / Tabs / Lugs / Bungs / Rivets / Screws / Grills / Mesh / Custom Attachments Or Other Fittings To Be Able To Fit The Product And This Has To Be Done Before The Paintjob. Items May Have Scratches / Broken Areas / Pinholes / Scuff Marks / Burrs / Unfinished Edges Or Areas / Discoloration Of Surface Finish / Stars Or Spider Marks / Dents / Grease Marks / Fingerprints / Dust / Uneven Surface / Surface Waves / Sagging / Porosity / Craters / Pock Marks / Fisheyes / Air Bubbles / Orange Peel / Surface Flakes / Wrinkles / Alligator Marks / Chalking / Fading / Spotting / Distortion Or Warping Or Deformation Or Wavy Surface / Lose Fibers / Loose Mounting Points / Dimples / Roughness / Release Or Delamination Of Surface Layer / Surface Defects / Mold Parting Lines Or Crease / Release Of Fibers / Water Spots / Resin Tearing / Blisters / Blushing / Heat Lines / Poor Flow Or Leveling / Air Pockets / Pre-release / Print Through Pattern On Surface From Fiber Reinforcement / Sticky Surface Or Inner Side / Uncured Surface Or Resin / Pits / Chips / Packaging Marks / Cracks / Stress Cracks Etc. All Of Which Are Common With Fiberglass Molded Products And Needs To Be Repaired / Finished Before Paintjob. Being Made With Clear Resins, Light May Pass Through The Fiberglass Parts.
Most Of The Issues Mentioned Above Means The Same With Different Names. Not All Parts Have Issues. Parts Come Un-assembled Of Hardware / Grills Or Any Other Fittings Shown In The Pictures.Please Study Working & Issues With Fiberglass Before Ordering If You Wish To Do Everything Yourself. We Also Offer Complete Finishing System From Sanding, Priming And High Quality Standard And Custom Paintjobs, Hydrographics, Electroluminiscent Paint, Spray Chrome, Heat Sensitive Paint, Neon Paint, Glow In The Dark Paint, Silver/Gold Leafing, Pinstriping, Powder Coating, Anodizing Etc. Check With Us Before Ordering. In Painted / Finished Products, We Will Take Care Of Surface Defects And Prep-work (Drilling May Still Be Required). Adjustments/Modifications May Still Be Required. Metal Parts Will Come In Unpainted / Unfinished Condition / Surface Oxidation (Rust) Unless Mentioned In The Listing Regardless Of The Listed Pictures. Painted / Chrome / Nickel Etc.
Plated Parts May Also Have Surface Rust. Inside Of The Metal Parts May Require Sealing Before Paintjob Or Fitting To The Motorcycle. Stainless Steel Products Tend To Change Color With Heat. Our Products Are Mostly Used For Show Purpose And We Are Not Responsible If Something Breaks / Fails Claiming Human Life Or Injuries While Riding / Installation (Professional Installation Is Always Advised). We Work With Only The Best And Tested Suppliers But Since The Parts Are Handmade, They Do Not Undergo Strict Quality Control System Like Mass Produced Products.
Please Check With Your Own Authorities For Any Additional Documentation / Approval Required To Use The Product In Your Location. We Are Not Responsible For Any Fine Caused By Using Our Product Without An Approval. Your Feedback Is Important To Us So Our Customers Can Know More About Our Products And Services.
We Are Open To Suggestions. Feel Free To Send Us Any Suggestion Regarding Our Products / Description Etc. Your Inputs Are Important To Us. Drop-shippers / Dealers / Distributors.
We Retail And Wholesale And We Would Be Happy To Develop International Dealers & Distributors. People Who Would Feature Our Products On Their YouTube Channel / Instagram Page / Facebook Page With Atleast 1000 Subscribers/Followers Can Ask For Special Discounts. We Are Constantly Adding New Products For Vintage And Classic Motorcycles, Bobbers, Choppers, Baggers, Cafe Racers, Street Bikes, Hot Rods And More.. We'd Be Glad To Answer All Your Queries. We Would Appreciate If You Could Spread A Word About Our Company Among The Bike Clubs, Face-book, Insta-gram Parts Traders, Bike Shows Etc.So We Can Help More People & Enthusiasts Like You Make Their Machines Stand Out With The Unique Products We Offer. Some Well Known Brand Names Are Mentioned In The Titles So Customers Can Find Products Quickly And Know The Item Can Fit / Can Be Made To Fit Their Vehicle. Our Products Do Not Met DOT Or SAE Guidelines For Safety. This Is Especially True Of Our Fiberglass Products, Metal Tanks Crush Upon Impact. Fiberglass Can Break And Leak Upon Impact. This Of Course Is A Source Of Fire And A Danger To You And Others. By Purchasing Any Of Our Products (And Other Non-compliant DOT And SAE Parts) You Are Assuming The Risks Of Danger, Injury And Death. We Are A Trading Company And All The Products We Have Listed Are Made / Supplied By Third Parties Only. We Do Not Have Any Control Over Production Of Any Patented / Branded / Trademarked Products By A Third Party. All The Products, Pictures, Logos, Titles And Information Are Given By Third Parties. All Cases Are Subject To Be Settled Under Faridabad, Haryana, India Jurisdiction Only. We Wish You A Great Day And Expect Your Visit Again At Our Store.. The item "Airbox Cover & Rear Fender Kit Harley V-rod V Rod Vrod NightRod NRS Muscle 02-17" is in sale since Tuesday, February 23, 2021. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Fairings & Body Work". The seller is "riderpitstop-mmx-us" and is located in Faridabad, HARYANA. This item can be shipped worldwide.